:: EQUIPMENT > AUGER - SCREW CONVEYOR ::

EQUIPMENT > AUGER - SCREW CONVEYOR

SCREW CONVEYOR - TRANSPORTATION OF CEMENT, FLOUR, ASH, CHALK STONE, LIME, WHEAT, CHIPS, STARCH, CATIONIC MEAL ETC.


We offer screw conveyors (augers) for horizontal or inclined transportation of dust-like, grainy, and cake-like granular materials.

Screw conveyors are used as feeders, metering units and mixers.

Auger (screw conveyor - transporter) is intended for transportation of granular and cake-like materials of bulk density of up to 2,0 t/cub. m in horizontal and inclined (up to 60°) directions.

Simple design, high productivity, reliability and easy maintenance of screw conveyors provide for wide usage thereof in various domains of production activities connected with transportation of large volumes of bulky goods.

BASIC DIAGRAM OF SCREW CONVEYOR (AUGER)


Fig. 1

Screw conveyor (auger) consists of parts and components as below:
housing (1), screw (2), bearing supports (3), charge and discharge ports (4) with attachment flanges (5), reducing gear (6) and drive motor (7) (Fig. 1).

During rotation of the screw, transported material is moved from charge port to discharge one.

Depending on screw conveyor installation requirements within process lines, the drive of feed screw can be made according to pushing pattern (feed screw drive is located on the side of charge port), and pulling pattern (feed screw drive is located on the side of discharge port).

Technical characteristics of augers:

Name Auger diameter,
mm
Length,
mm
Power consumption, kW Rotational speed on shaft, rev./min Productivity, t/hour Price, USD/l.m. VAT excluded
 
1 Screw conveyor (auger) 219 up to 12000 1,5 - 5,5 50 - 224 1 - 60 from 428,00
2 Screw conveyor (auger) 320 up to 3000 3,5 - 15,0 50 - 224 5 - 150 In accord with TS
3 Screw conveyor (auger) from 450 to 1200 до 30000 7,5 - 30,0 50 - 224 50 - 500 In accord with TS

Where: TS - Customer's technical specifications.

Description:

Загрузочное окно шнека с витком

Charge/discharge branch pipes are provided with attachment flanges for connecting screw conveyors to storing bins for granular materials, mixing equipment, metering devices and so on.

Configuration of screw conveyor attachment flanges allows mounting butterfly gates both of pneumatic and manual control.

Conveyors of any type (diameter) can be made to order!

By request of the Customer, conveyors can be completed with frequency converters - units of smooth start for controlling conveyor speed-up and breaking to ensure adjustment of drive speed from zero to nominal engine speed and higher, without reduction of torque on the shaft.

More exact prices can be provided upon receiving of Your request only.